NAD: Laney Lionheart L5T

Discuss the stuff that makes your ears bleed.

Moderators: Slowy, Capt. Black

Post Reply
vintage52
Vintage Post Junkie
Vintage Post Junkie
Posts: 1616
meble-kuchenne.warszawa.pl
Joined: Fri Dec 07, 2007 8:01 pm
Has liked: 363 times
Been liked: 128 times

NAD: Laney Lionheart L5T

Post by vintage52 »

So, Sizzling got his Marshall cos I bought his Laney.

Had it for over a month and the love affair is still strong.

Clever wee amp in it's config and thoughtfulness of configuration.

All the standard stuff is there - clean channel and drive channel with shared EQ of B, M, T - drive channel having a MV, spring reverb.

1 x EL84 in the power section being fed by 3 x 12AX7s.

There's 2 inputs - a lo and a hi meaning Lo gain and Hi gain.
Hi is designed for your single coils and Lo for the HBs.

At the end of the amplification chain is a tone control.
This works in a similar fashion to a tone control on a guitar.
This has the ability to not only control the overall top end response but also reduce upper end harmonics on the output stage and preamplifier overdrive sounds.
This will give you bright cutting sounds at high settings and smooth rounded sounds at lower settings.
A very clever, useful and musical feature.

At the front of all this - the two inputs give you a low to medium drive option using the Lo input and more hi gain using the Hi input.
It's like having two dedicated drive pedals up front.

My Fenders through this amp retain their vibe and the interplay between the guitars and amp are quite dynamic.

The controls on the guitars alter your tone as you expect them too.
Reminds me of the days I owned a 5E3 and getting your sound came back to setting the amp to a sound you liked and using guitar volume, guitar tone and how hard you played the guitar to get different feels.

Coolness, to me ,in an amp is being able to get multi faceted tones out of it. This is no one trick pony.

Manipulating the drive channel gain and tone stack combined with the selection of input goes from Deluxe to JTM45 to almost, but not quite, JCM800 juciness.

And if you push the tone at the end of the chain all the way up, very Vox like chiminess.

Learning Can't You Hear Me Knocking and the cranked tones in that song are easy to find in the Laney.

So far, a very fun and encouraging amp to play.

Highly recommend if you see one come up.
Wellington

IMOCD
Vintage Post Junkie
Vintage Post Junkie
Posts: 1744
Joined: Tue May 10, 2016 9:04 pm
Has liked: 480 times
Been liked: 221 times

Re: NAD: Laney Lionheart L5T

Post by IMOCD »

vintage52 wrote: Thu Mar 09, 2023 12:59 pm So, Sizzling got his Marshall cos I bought his Laney.

Had it for over a month and the love affair is still strong.

Clever wee amp in it's config and thoughtfulness of configuration.

All the standard stuff is there - clean channel and drive channel with shared EQ of B, M, T - drive channel having a MV, spring reverb.

1 x EL84 in the power section being fed by 3 x 12AX7s.

There's 2 inputs - a lo and a hi meaning Lo gain and Hi gain.
Hi is designed for your single coils and Lo for the HBs.

At the end of the amplification chain is a tone control.
This works in a similar fashion to a tone control on a guitar.
This has the ability to not only control the overall top end response but also reduce upper end harmonics on the output stage and preamplifier overdrive sounds.
This will give you bright cutting sounds at high settings and smooth rounded sounds at lower settings.
A very clever, useful and musical feature.

At the front of all this - the two inputs give you a low to medium drive option using the Lo input and more hi gain using the Hi input.
It's like having two dedicated drive pedals up front.

My Fenders through this amp retain their vibe and the interplay between the guitars and amp are quite dynamic.

The controls on the guitars alter your tone as you expect them too.
Reminds me of the days I owned a 5E3 and getting your sound came back to setting the amp to a sound you liked and using guitar volume, guitar tone and how hard you played the guitar to get different feels.

Coolness, to me ,in an amp is being able to get multi faceted tones out of it. This is no one trick pony.

Manipulating the drive channel gain and tone stack combined with the selection of input goes from Deluxe to JTM45 to almost, but not quite, JCM800 juciness.

And if you push the tone at the end of the chain all the way up, very Vox like chiminess.

Learning Can't You Hear Me Knocking and the cranked tones in that song are easy to find in the Laney.

So far, a very fun and encouraging amp to play.

Highly recommend if you see one come up.
Great review!

User avatar
sizzlingbadger
Vintage Post Junkie
Vintage Post Junkie
Posts: 8241
Joined: Sat Jan 15, 2011 7:12 am
Location: Wire Wrapper
Has liked: 1202 times
Been liked: 1398 times

Re: NAD: Laney Lionheart L5T

Post by sizzlingbadger »

Glad you are enjoying the amp, I do miss it. I never used any drive pedals with the Laney so not sure how well they work. Cranking the clean channel gives a great rock tone, the single ended output overdrives so nicely. The G12H Heritage speaker in the Laney is pure magic, suites it so well.

The Marshall Astoria is very cool too, but its not as good at very low volumes despite the faux 5W setting. I have reduced the boost setting a bit and tried some EL34's which take the top edge off a little.I think the Creamback 75 is quite a bright speaker, some do say it can be harsh. This is a custom version for Marshall but it could just be the label on the back ;-) I did reduce the pre-amp gain too but I have put that back as it wasn't as sweet sounding with the triode output loaded up another 50Kohms, it lost some harmonics to my ears, due to the bias being effected.
Tube amp and guitar tones straight from 1958… amazing how believable the sounds were back then, even without the modellers...

vintage52
Vintage Post Junkie
Vintage Post Junkie
Posts: 1616
Joined: Fri Dec 07, 2007 8:01 pm
Has liked: 363 times
Been liked: 128 times

Re: NAD: Laney Lionheart L5T

Post by vintage52 »

sizzlingbadger wrote: Sat Mar 11, 2023 8:55 am I never used any drive pedals with the Laney so not sure how well they work.
It doesn’t need them eh?

Having the two different gain inputs is a bloody clever idea and allows you to use like low, medium or high gain without pedals.

Well thought out amp.

Have not cranked the clean yet but will give it a bash.

I like the reviews of the Astoria.

Doubt I’d ever have the coin to buy one.
Wellington

User avatar
jeremyb
Chorus of Organs
Posts: 40888
Joined: Sat Dec 06, 2008 9:03 am
Has liked: 7691 times
Been liked: 4158 times

Re: NAD: Laney Lionheart L5T

Post by jeremyb »

vintage52 wrote: Sat Mar 11, 2023 3:16 pm
sizzlingbadger wrote: Sat Mar 11, 2023 8:55 am I never used any drive pedals with the Laney so not sure how well they work.
It doesn’t need them eh?

Having the two different gain inputs is a bloody clever idea and allows you to use like low, medium or high gain without pedals.

Well thought out amp.

Have not cranked the clean yet but will give it a bash.

I like the reviews of the Astoria.

Doubt I’d ever have the coin to buy one.
In the past when I've had two input amps I've used an A/B switcher so I can have a clean or dirty tone at the flick of a switch :thumbup:
Slowy wrote: That's the problem; everything rewarding is just such hard work. Regret takes much less effort.

vintage52
Vintage Post Junkie
Vintage Post Junkie
Posts: 1616
Joined: Fri Dec 07, 2007 8:01 pm
Has liked: 363 times
Been liked: 128 times

Re: NAD: Laney Lionheart L5T

Post by vintage52 »

jeremyb wrote: Sat Mar 11, 2023 3:34 pm

In the past when I've had two input amps I've used an A/B switcher so I can have a clean or dirty tone at the flick of a switch :thumbup:
What a bloody good idea. Thanks!!
Wellington

User avatar
sizzlingbadger
Vintage Post Junkie
Vintage Post Junkie
Posts: 8241
Joined: Sat Jan 15, 2011 7:12 am
Location: Wire Wrapper
Has liked: 1202 times
Been liked: 1398 times

Re: NAD: Laney Lionheart L5T

Post by sizzlingbadger »

I used to do that on Vox's with the Normal and Top Boost channels, set one clean and one dirty. The Laney has a shared EQ for the clean and dirty channels but if you look at the schematic it tweaks the EQ when you switch between them so they both work pretty well through a single set of settings.
Tube amp and guitar tones straight from 1958… amazing how believable the sounds were back then, even without the modellers...

IMOCD
Vintage Post Junkie
Vintage Post Junkie
Posts: 1744
Joined: Tue May 10, 2016 9:04 pm
Has liked: 480 times
Been liked: 221 times

Re: NAD: Laney Lionheart L5T

Post by IMOCD »

vintage52 wrote: Sat Mar 11, 2023 3:47 pm
jeremyb wrote: Sat Mar 11, 2023 3:34 pm

In the past when I've had two input amps I've used an A/B switcher so I can have a clean or dirty tone at the flick of a switch :thumbup:
What a bloody good idea. Thanks!!
I guess you don't have the Laney footswitch then? They came as standard.

vintage52
Vintage Post Junkie
Vintage Post Junkie
Posts: 1616
Joined: Fri Dec 07, 2007 8:01 pm
Has liked: 363 times
Been liked: 128 times

Re: NAD: Laney Lionheart L5T

Post by vintage52 »

IMOCD wrote: Sat Mar 11, 2023 5:22 pm
I guess you don't have the Laney footswitch then? They came as standard.
It’s all there.

Have the footswitch.

Using the drive channel and switching between inputs is a cool idea.

Gives more access to low / high gain.
Wellington

User avatar
jeremyb
Chorus of Organs
Posts: 40888
Joined: Sat Dec 06, 2008 9:03 am
Has liked: 7691 times
Been liked: 4158 times

Re: NAD: Laney Lionheart L5T

Post by jeremyb »

vintage52 wrote: Sat Mar 11, 2023 3:47 pm
jeremyb wrote: Sat Mar 11, 2023 3:34 pm

In the past when I've had two input amps I've used an A/B switcher so I can have a clean or dirty tone at the flick of a switch :thumbup:
What a bloody good idea. Thanks!!
When I had my AC15 I made a MXR sized stomp box I made which had 3 switches, one for A/B, one for reverb, one for trem, was awesome!!
Slowy wrote: That's the problem; everything rewarding is just such hard work. Regret takes much less effort.

vintage52
Vintage Post Junkie
Vintage Post Junkie
Posts: 1616
Joined: Fri Dec 07, 2007 8:01 pm
Has liked: 363 times
Been liked: 128 times

Re: NAD: Laney Lionheart L5T

Post by vintage52 »

jeremyb wrote: Sat Mar 11, 2023 7:12 pm
When I had my AC15 I made a MXR sized stomp box I made which had 3 switches, one for A/B, one for reverb, one for trem, was awesome!!
Oooooo - I like this.

Hard to make?

I've borrowed an AB for testing purposes.

Opens me up to a 4 channel amp so will bite the bullet and find an AB.
Wellington

User avatar
jeremyb
Chorus of Organs
Posts: 40888
Joined: Sat Dec 06, 2008 9:03 am
Has liked: 7691 times
Been liked: 4158 times

Re: NAD: Laney Lionheart L5T

Post by jeremyb »

vintage52 wrote: Wed Mar 15, 2023 8:01 am
jeremyb wrote: Sat Mar 11, 2023 7:12 pm
When I had my AC15 I made a MXR sized stomp box I made which had 3 switches, one for A/B, one for reverb, one for trem, was awesome!!
Oooooo - I like this.

Hard to make?

I've borrowed an AB for testing purposes.

Opens me up to a 4 channel amp so will bite the bullet and find an AB.
Was easy as, I already had the reverb / trem switch for the amp so I gutted that and then put that and a basic A/B circuit in the same box :-)
Slowy wrote: That's the problem; everything rewarding is just such hard work. Regret takes much less effort.

Post Reply