![Waving :wave:](./images/smilies/icon_wave.gif)
I'm installing these nice Seymour Duncan pickups in my Schecter and the wire colours are different so I thought it'd be wise to ask for advice about which wire goes where before I go in guns blazing.
Here's my existing (to be removed) bridge pickup in black casing: with green&white, black&bare and red wires going places.
![Image](http://i.imgur.com/qeilQ5W.jpg)
Here's the wiring diagram for the bad boy, it looks pretty simple. For the life of me I can't find exactly the right wiring diagram but this one has the same colours going to the same things as mine so it should be a good indicator.
![Image](http://i.imgur.com/wAUU4Kb.png)
Here's the Seymour wires which I'm installing, looking very tidy and clean, thanks.
![Smile :)](./images/smilies/icon_smile.gif)
![Image](http://i.imgur.com/7sz6eWU.jpg)
So my guess would be that I want to:
remove the old green&white pair and replace with the SD red&white on the [push-pull tone on the right],
remove the old black&bare pair and replace with the SD green&bare pair on the pot earth,
remove the old red wire from the pot and replace with the SD black.
What are your thoughts?
![Smile :)](./images/smilies/icon_smile.gif)