Page 338 of 425

Re: What are you gassing for?

Posted: Fri Jul 24, 2020 9:34 am
by jeremyb
mule wrote: Fri Jul 24, 2020 9:23 am Looking at a rejig of my pedalboard. Few things I want to add or replace:
- Nicer delay to replace DD-3. I like the look of the 80tape In Limbo but I'm not sure if they're still making them
- Fuzz to replace big muff, something a bit weirder ideally
- Isolated power supply
- Something else? Chorus/trem or something. Will know it when I see it...
Check out the source audio nemesis delay, so good! Fuzz Factory would be a good choice IMO, you can get nice to fucking nasty tones out of one, there are some nice trem pedals out there, my favourite has to be the Tremotron!


Re: What are you gassing for?

Posted: Fri Jul 24, 2020 9:37 am
by AiRdAd
Expect to see Reg posting in this thread - he's got three grant to spend !!! :-)

Re: What are you gassing for?

Posted: Fri Jul 24, 2020 9:54 am
by jeremyb
AiRdAd wrote: Fri Jul 24, 2020 9:37 am Expect to see Reg posting in this thread - he's got three grant to spend !!! :-)
I heard he's got an order in for a MK2 Katana Head and 2x12 :mrgreen:

Re: What are you gassing for?

Posted: Fri Jul 24, 2020 9:58 am
by hamo
AiRdAd wrote: Fri Jul 24, 2020 9:37 am Expect to see Reg posting in this thread - he's got three grant to spend !!! :-)

Jeebux, how many vintage guitars could you buy for three grant? :lol:

Re: What are you gassing for?

Posted: Fri Jul 24, 2020 11:11 am
by codedog
mule wrote: Fri Jul 24, 2020 9:23 am Looking at a rejig of my pedalboard. Few things I want to add or replace:
- Nicer delay to replace DD-3. I like the look of the 80tape In Limbo but I'm not sure if they're still making them
- Fuzz to replace big muff, something a bit weirder ideally
- Isolated power supply
- Something else? Chorus/trem or something. Will know it when I see it...
Is that KoT clone still on the board?

Re: What are you gassing for?

Posted: Fri Jul 24, 2020 11:41 am
by werdna
Tele partscasters. Each day I read Reverb, the Gear Page and Ebay. Key word Warmoth. I want a single bound, black tele body, fully loaded. The neck I can give or take. Wanting to get a Warmoth tele neck with Wolfgang profile. So much want. Yet last month it was Asher T-Deluxes. And next month, it'll be something else. I question whether I am in control any longer of my pastime.

Re: What are you gassing for?

Posted: Fri Jul 24, 2020 11:50 am
by jeremyb
werdna wrote: Fri Jul 24, 2020 11:41 am Tele partscasters. Each day I read Reverb, the Gear Page and Ebay. Key word Warmoth. I want a single bound, black tele body, fully loaded. The neck I can give or take. Wanting to get a Warmoth tele neck with Wolfgang profile. So much want. Yet last month it was Asher T-Deluxes. And next month, it'll be something else. I question whether I am in control any longer of my pastime.
I could see you rocking something like this: https://stratosphereparts.com/new-fende ... y-tbf-bkp/

Re: What are you gassing for?

Posted: Fri Jul 24, 2020 12:43 pm
by JohnG
jeremyb wrote: Fri Jul 24, 2020 11:50 am
werdna wrote: Fri Jul 24, 2020 11:41 am Tele partscasters. Each day I read Reverb, the Gear Page and Ebay. Key word Warmoth. I want a single bound, black tele body, fully loaded. The neck I can give or take. Wanting to get a Warmoth tele neck with Wolfgang profile. So much want. Yet last month it was Asher T-Deluxes. And next month, it'll be something else. I question whether I am in control any longer of my pastime.
I could see you rocking something like this: https://stratosphereparts.com/new-fende ... y-tbf-bkp/
I'm about to press the button on a Strat Neck from those Guys and a Relic Body from MJT...gonna be pretty costly once I get all the other bits etc...but lots of fun in the planning!

Re: What are you gassing for?

Posted: Fri Jul 24, 2020 12:48 pm
by KNNZ
JohnG wrote: Fri Jul 24, 2020 12:43 pm
jeremyb wrote: Fri Jul 24, 2020 11:50 am
werdna wrote: Fri Jul 24, 2020 11:41 am Tele partscasters. Each day I read Reverb, the Gear Page and Ebay. Key word Warmoth. I want a single bound, black tele body, fully loaded. The neck I can give or take. Wanting to get a Warmoth tele neck with Wolfgang profile. So much want. Yet last month it was Asher T-Deluxes. And next month, it'll be something else. I question whether I am in control any longer of my pastime.
I could see you rocking something like this: https://stratosphereparts.com/new-fende ... y-tbf-bkp/
I'm about to press the button on a Strat Neck from those Guys and a Relic Body from MJT...gonna be pretty costly once I get all the other bits etc...but lots of fun in the planning!
and possibly lots of waiting :mrgreen:

Re: What are you gassing for?

Posted: Fri Jul 24, 2020 1:13 pm
by JohnG
KNNZ wrote: Fri Jul 24, 2020 12:48 pm
JohnG wrote: Fri Jul 24, 2020 12:43 pm
jeremyb wrote: Fri Jul 24, 2020 11:50 am

I could see you rocking something like this: https://stratosphereparts.com/new-fende ... y-tbf-bkp/
I'm about to press the button on a Strat Neck from those Guys and a Relic Body from MJT...gonna be pretty costly once I get all the other bits etc...but lots of fun in the planning!
and possibly lots of waiting :mrgreen:
Ha! True...Wonder if the US Dollar is gonna tank with all the going's on, and I'll end up wishing I'd held off anyway!

Re: What are you gassing for?

Posted: Fri Jul 24, 2020 9:52 pm
by mule
codedog wrote: Fri Jul 24, 2020 11:11 am
mule wrote: Fri Jul 24, 2020 9:23 am Looking at a rejig of my pedalboard. Few things I want to add or replace:
- Nicer delay to replace DD-3. I like the look of the 80tape In Limbo but I'm not sure if they're still making them
- Fuzz to replace big muff, something a bit weirder ideally
- Isolated power supply
- Something else? Chorus/trem or something. Will know it when I see it...
Is that KoT clone still on the board?
Yep I'm really happy with it. Between that and the hotcake there's a good variety of combinations of dirt. No plans to get rid of it any time soon :D

Re: What are you gassing for?

Posted: Fri Jul 24, 2020 10:27 pm
by mule
jeremyb wrote: Fri Jul 24, 2020 9:34 am
mule wrote: Fri Jul 24, 2020 9:23 am Looking at a rejig of my pedalboard. Few things I want to add or replace:
- Nicer delay to replace DD-3. I like the look of the 80tape In Limbo but I'm not sure if they're still making them
- Fuzz to replace big muff, something a bit weirder ideally
- Isolated power supply
- Something else? Chorus/trem or something. Will know it when I see it...
Check out the source audio nemesis delay, so good! Fuzz Factory would be a good choice IMO, you can get nice to fucking nasty tones out of one, there are some nice trem pedals out there, my favourite has to be the Tremotron!

Yep fuzz factory has been in my eye for awhile. Have given up on finding one locally so may just need to suck it up and order one new.

That trem looks amazing but is probably surplus to requirements and the sheer amount of LEDs gives me anxiety :D

Re: What are you gassing for?

Posted: Sat Jul 25, 2020 9:56 am
by jeremyb
mule wrote: Fri Jul 24, 2020 10:27 pm
jeremyb wrote: Fri Jul 24, 2020 9:34 am
mule wrote: Fri Jul 24, 2020 9:23 am Looking at a rejig of my pedalboard. Few things I want to add or replace:
- Nicer delay to replace DD-3. I like the look of the 80tape In Limbo but I'm not sure if they're still making them
- Fuzz to replace big muff, something a bit weirder ideally
- Isolated power supply
- Something else? Chorus/trem or something. Will know it when I see it...
Check out the source audio nemesis delay, so good! Fuzz Factory would be a good choice IMO, you can get nice to fucking nasty tones out of one, there are some nice trem pedals out there, my favourite has to be the Tremotron!

Yep fuzz factory has been in my eye for awhile. Have given up on finding one locally so may just need to suck it up and order one new.

That trem looks amazing but is probably surplus to requirements and the sheer amount of LEDs gives me anxiety :D
Fuzz Factory is a really easy build if you can solder :)

Re: What are you gassing for?

Posted: Sat Jul 25, 2020 10:24 am
by mule
jeremyb wrote: Sat Jul 25, 2020 9:56 amFuzz Factory is a really easy build if you can solder :)
I just really want to support the folks at zvex.

Definitely has nothing to do with me being terrible at soldering...

Re: What are you gassing for?

Posted: Sat Jul 25, 2020 10:50 am
by Mini Forklift
No GAS right now as I need to start saving for back surgery

Have had major pain for a while, found out I had a ruptured disc so got a nerve blocker & cortisone injection but it didn't work. Went back this week to see my Orthopedic surgeon and now I'm in line for a L5/S1 Discectomy. Oh the joy