Swaps Thread

Fair exchange ain't no robbery

Moderator: Capt. Black

User avatar
MattH
Vintage Post Junkie
Vintage Post Junkie
Posts: 1043
meble-kuchenne.warszawa.pl
Joined: Sun May 13, 2012 5:17 pm
Has liked: 157 times
Been liked: 96 times

Re: Swaps Thread

Post by MattH »

KentNZ wrote:I’m not sure really. Fuzz is probably one thing missing but I haven’t got in with it in the past. Maybe preamp or EQ/neve emulators.
I went through a stack of great fuzzes years ago and never kept any of them. I had a Stomp Under Foot Ram’s Head or something (it had serial number of #003, I seem to remember), and a Klinger Buzz Fuzz that was just stupid. They were heaps of fun, but I just couldn’t find a use for them. They were far too intense for my cheesy country/easy listening band mates.

Now I hardly ever play live so I really want an excuse to go balls to the wall fuzz again...
All the gear... absolutely no idea...

User avatar
KentNZ
Vintage Post Junkie
Vintage Post Junkie
Posts: 1764
Joined: Thu Apr 29, 2010 3:24 pm
Has liked: 18 times
Been liked: 59 times
Contact:

Re: Swaps Thread

Post by KentNZ »

In a perfect world, the JHS Clover. :)
Larrivee 00 Acoustic. FAV Strat for electric. Ibanez SDGR5 for bass. Push for Ableton. When not doing that, 3D CAD for tunnels...

NippleWrestler
Vintage Post Junkie
Vintage Post Junkie
Posts: 1291
Joined: Sat Jan 02, 2016 5:05 pm
Has liked: 26 times
Been liked: 400 times

Re: Swaps Thread

Post by NippleWrestler »

Which is a modded Boss FA-1. I'm not sure how much those are though.

User avatar
KentNZ
Vintage Post Junkie
Vintage Post Junkie
Posts: 1764
Joined: Thu Apr 29, 2010 3:24 pm
Has liked: 18 times
Been liked: 59 times
Contact:

Re: Swaps Thread

Post by KentNZ »

NippleWrestler wrote:Which is a modded Boss FA-1. I'm not sure how much those are though.
I suspect JHS did their one as the Boss ones are getting up there in value a bit now.
Larrivee 00 Acoustic. FAV Strat for electric. Ibanez SDGR5 for bass. Push for Ableton. When not doing that, 3D CAD for tunnels...

User avatar
Conway
Vintage Post Junkie
Vintage Post Junkie
Posts: 9058
Joined: Mon Aug 29, 2011 1:33 pm
Location: Auckland
Has liked: 254 times
Been liked: 1071 times
Contact:

Re: Swaps Thread

Post by Conway »

Got these, open to swap suggestions... overdrive/distortion/fuzz/boost/tremolo/???

Image
Image
GUITARS ROCK - www.guitarsrock.co.nz
TONE LOUNGE - www.tonelounge.co.nz

User avatar
rickenbackerkid
Vintage Post Junkie
Vintage Post Junkie
Posts: 6158
Joined: Thu Apr 28, 2005 1:52 pm
Has liked: 163 times
Been liked: 511 times

Re: Swaps Thread

Post by rickenbackerkid »

Boss CS-1
Tech21 British

looking for an EB volume jnr and also interested in cheapish amp modelling type devices

Voxshall
Fender
Fender
Posts: 563
Joined: Sat Nov 27, 2004 1:01 pm
Location: Auckland
Has liked: 113 times
Been liked: 215 times

Re: Swaps Thread

Post by Voxshall »

I have

Centura - Klone
Trio - Create a band
Boss DD-7
Electrode compressor PC-2A
Marshall Power Brake
High quality speaker cable Kimber x2 or Evidence Siren x2
Ulbrick 12AXE pedal
Double Electric gigbag

I'm after

High quality step down transformer to run an american device.
EBS or Rockboard Flat Patch cables
NOS 6V6 tubes

User avatar
olegmcnoleg
Vintage Post Junkie
Vintage Post Junkie
Posts: 3800
Joined: Sat Dec 21, 2013 11:26 am
Location: Awkland
Has liked: 736 times
Been liked: 690 times

Re: Swaps Thread

Post by olegmcnoleg »

Oooh, I have a high quality 120V step down, 800W, voltage regulator, circuit breaker and voltmeter on the front. Has 2 120VAC US sockets on the back and a universal plug with an NZ inset on the mains chord.

AND I have some old 6v6 tubes. No idea what condition they are in though, I've not managed to get my hands on a tube tester, so it is a kind of pot luck. I believe they all work, and I think I got them from somebody on the forum...Reg maybe?

What rating is the power brake? (Ohms & Watts)

User avatar
robthemac
Vintage Post Junkie
Vintage Post Junkie
Posts: 2344
Joined: Sun Apr 28, 2019 3:47 pm
Has liked: 676 times
Been liked: 486 times

Re: Swaps Thread

Post by robthemac »

Voxshall wrote:I have

Centura - Klone
Trio - Create a band
Boss DD-7
Electrode compressor PC-2A
Marshall Power Brake
High quality speaker cable Kimber x2 or Evidence Siren x2
Ulbrick 12AXE pedal
Double Electric gigbag

I'm after

High quality step down transformer to run an american device.
EBS or Rockboard Flat Patch cables
NOS 6V6 tubes
If you don't trade the Power Brake, I might be interested in buying.

Voxshall
Fender
Fender
Posts: 563
Joined: Sat Nov 27, 2004 1:01 pm
Location: Auckland
Has liked: 113 times
Been liked: 215 times

Re: Swaps Thread

Post by Voxshall »

robthemac wrote:
Voxshall wrote:I have

Centura - Klone
Trio - Create a band
Boss DD-7
Electrode compressor PC-2A
Marshall Power Brake
High quality speaker cable Kimber x2 or Evidence Siren x2
Ulbrick 12AXE pedal
Double Electric gigbag

I'm after

High quality step down transformer to run an american device.
EBS or Rockboard Flat Patch cables
NOS 6V6 tubes
If you don't trade the Power Brake, I might be interested in buying.
Sounds good, it's at my parents so i'll pick it up for you this weekend.

User avatar
robthemac
Vintage Post Junkie
Vintage Post Junkie
Posts: 2344
Joined: Sun Apr 28, 2019 3:47 pm
Has liked: 676 times
Been liked: 486 times

Re: Swaps Thread

Post by robthemac »

Voxshall wrote:
robthemac wrote:
Voxshall wrote:I have

Centura - Klone
Trio - Create a band
Boss DD-7
Electrode compressor PC-2A
Marshall Power Brake
High quality speaker cable Kimber x2 or Evidence Siren x2
Ulbrick 12AXE pedal
Double Electric gigbag

I'm after

High quality step down transformer to run an american device.
EBS or Rockboard Flat Patch cables
NOS 6V6 tubes
If you don't trade the Power Brake, I might be interested in buying.
Sounds good, it's at my parents so i'll pick it up for you this weekend.
Emphasis on the 'might'. Still hanging out for an Iridium in preference.

User avatar
dayl
Vintage Post Junkie
Vintage Post Junkie
Posts: 4704
Joined: Tue Sep 02, 2008 6:40 pm
Has liked: 381 times
Been liked: 285 times

Re: Swaps Thread

Post by dayl »

I have a top end stepdown from Dick Smith that I used to run some of my US rack equipment a while back. Interested in DD7. Let me know if interested and I'll see if I can find it. Pref AUcks based? as its heavy
1999 Peavey Wolfgang Hardtail
2006 Schecter Omen Extreme 7 String
2014 Ibanez RGIR28FE 8 String
2019 LTD M-Black Metal

Voxshall
Fender
Fender
Posts: 563
Joined: Sat Nov 27, 2004 1:01 pm
Location: Auckland
Has liked: 113 times
Been liked: 215 times

Re: Swaps Thread

Post by Voxshall »

dayl wrote:I have a top end stepdown from Dick Smith that I used to run some of my US rack equipment a while back. Interested in DD7. Let me know if interested and I'll see if I can find it. Pref AUcks based? as its heavy
Im interested in the specifications on it, and if the transformer is made in New Zealand or China? I was after a New Zealand made transformer.

Voxshall
Fender
Fender
Posts: 563
Joined: Sat Nov 27, 2004 1:01 pm
Location: Auckland
Has liked: 113 times
Been liked: 215 times

Re: Swaps Thread

Post by Voxshall »

robthemac wrote:
Voxshall wrote:
robthemac wrote:
If you don't trade the Power Brake, I might be interested in buying.
Sounds good, it's at my parents so i'll pick it up for you this weekend.
Emphasis on the 'might'. Still hanging out for an Iridium in preference.
No worries I’ll grab it for you anyway and you can borrow it if you like and give it a test run.

User avatar
griff
Vintage Post Junkie
Vintage Post Junkie
Posts: 1352
Joined: Sun Feb 12, 2017 6:57 pm
Has liked: 452 times
Been liked: 162 times

Re: Swaps Thread

Post by griff »

I have a couple of Celestion K100's, 8 ohm that I'm keen to swap for something less efficient/lower wattage.

Post Reply