Yes - it can sound lovely. But not so good for big metal power chords...jeremyb wrote: ↑Sun Mar 05, 2023 1:03 pmGreat explanation, so it would appear to kinda swell into the note or chord?MikeC wrote: ↑Sun Mar 05, 2023 10:46 am"Sag", like "bloom" - hit a big loud note or chord with the amp cranked and the power supply can't instantly keep up so there is a kind-of delay in the volume and fullness. Tube rectifiers exhibit a voltage drop as their output current increases and it's especially noticeable (also to to the ear) when asked for a sudden increase. It's desirable for many (not all). I can't think of a practical way to see it on the scope.
MikeC Sixty-One SRT
Moderators: Slowy, Capt. Black
- MikeC
- Vintage Post Junkie
- Posts: 3166
- meble-kuchenne.warszawa.pl
- Joined: Fri Sep 12, 2003 5:43 pm
- Location: Red Beach, Auckland
- Has liked: 1410 times
- Been liked: 965 times
Re: MikeC Sixty-One SRT
Whakanuia o mea kei a koe
- jeremyb
- Chorus of Organs
- Posts: 42669
- Joined: Sat Dec 06, 2008 9:03 am
- Has liked: 8212 times
- Been liked: 4328 times
Re: MikeC Sixty-One SRT
Would this be why amps like Mesa's dual and triple rectifiers have more than one?MikeC wrote: ↑Sun Mar 05, 2023 1:15 pmYes - it can sound lovely. But not so good for big metal power chords...jeremyb wrote: ↑Sun Mar 05, 2023 1:03 pmGreat explanation, so it would appear to kinda swell into the note or chord?MikeC wrote: ↑Sun Mar 05, 2023 10:46 am
"Sag", like "bloom" - hit a big loud note or chord with the amp cranked and the power supply can't instantly keep up so there is a kind-of delay in the volume and fullness. Tube rectifiers exhibit a voltage drop as their output current increases and it's especially noticeable (also to to the ear) when asked for a sudden increase. It's desirable for many (not all). I can't think of a practical way to see it on the scope.
- MikeC
- Vintage Post Junkie
- Posts: 3166
- Joined: Fri Sep 12, 2003 5:43 pm
- Location: Red Beach, Auckland
- Has liked: 1410 times
- Been liked: 965 times
Re: MikeC Sixty-One SRT
I'd say yes. Multiple rectifiers provide the power providing capability when it's needed/wanted and also gives the user choices for more "spongy" thru to "solid" by which rectifier(s) they select. NOTE: I'm presuming there are switchable choices as I've never owned one.
Whakanuia o mea kei a koe
- RectifiedAmps
- Fender
- Posts: 544
- Joined: Tue Jul 22, 2014 7:05 am
- Location: Wellington
- Has liked: 225 times
- Been liked: 265 times
Re: MikeC Sixty-One SRT
If it sounds good then keep it, but 1k (1.23k with the internal resistance of the EZ81) is a lot of series resistance for the current drawn by the EL84s. Even if it's not sagging excessively, it could be responsible for the lack of bass response you mentioned.
Having the 1k before the OT seems to be what Vox intended. The later AC10 710 schematic also shows the same thing and the EF86-equipped 60's AC10s and AC15s had 100R resistors between the EL84 anodes and the OT primaries, so it seems like something Vox frequently did in the 60's.MikeC wrote: ↑Sun Mar 05, 2023 10:08 am Notice on the attached "other" AC10 SRT schematic (OS-71), the rectifier's output all goes thru R18 (1K ohm 10W resistor). I did some calculations from readings with my amp at full tilt and that resistor is dissipating 9.6W (so the 10W rating on the OS-71 schematic would seem correct).
My PT voltages match the AC10 SRU schematic (the one I sent you).
But in that schematic it appears that the OT primary is dropping 95V. Doubt it Harry!
Putting the rectifier's output all thru R18 (1K ohm 10W resistor) gets me close.
The schematic also shows the EL84 screens at 300V and the anodes at 295V - that's a bad idea for valve life and I'd recommend some screen resistors to be safe.
- olegmcnoleg
- Vintage Post Junkie
- Posts: 5709
- Joined: Sat Dec 21, 2013 11:26 am
- Location: Awkland
- Has liked: 891 times
- Been liked: 775 times
Re: MikeC Sixty-One SRT
RectifiedAmps wrote: ↑Sun Mar 05, 2023 7:07 pm
The schematic also shows the EL84 screens at 300V and the anodes at 295V - that's a bad idea for valve life and I'd recommend some screen resistors to be safe.
This explains a lot
![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
- RectifiedAmps
- Fender
- Posts: 544
- Joined: Tue Jul 22, 2014 7:05 am
- Location: Wellington
- Has liked: 225 times
- Been liked: 265 times
Re: MikeC Sixty-One SRT
Ha! Ok, more details: when the screens are at a higher voltage than the anode, they 'steal' extra current away from the anode. Screens aren't rated for as much current as anodes, so if they draw too much it stresses them and can lead to them failing, which usually means a short circuit. Adding some screen resistors drops the voltage on the screens closer to that at the anode, plus it provides some current limiting if the screens start to draw too much.olegmcnoleg wrote: ↑Sun Mar 05, 2023 7:15 pmThis explains a lotRectifiedAmps wrote: ↑Sun Mar 05, 2023 7:07 pm
The schematic also shows the EL84 screens at 300V and the anodes at 295V - that's a bad idea for valve life and I'd recommend some screen resistors to be safe.![]()
![Image](https://www.valvewizard.co.uk/pentode0.jpg)
- olegmcnoleg
- Vintage Post Junkie
- Posts: 5709
- Joined: Sat Dec 21, 2013 11:26 am
- Location: Awkland
- Has liked: 891 times
- Been liked: 775 times
Re: MikeC Sixty-One SRT
Thanks for the extra detail. Fascinating stuff.RectifiedAmps wrote: ↑Sun Mar 05, 2023 7:38 pmHa! Ok, more details: when the screens are at a higher voltage than the anode, they 'steal' extra current away from the anode. Screens aren't rated for as much current as anodes, so if they draw too much it stresses them and can lead to them failing, which usually means a short circuit. Adding some screen resistors drops the voltage on the screens closer to that at the anode, plus it provides some current limiting if the screens start to draw too much.olegmcnoleg wrote: ↑Sun Mar 05, 2023 7:15 pmThis explains a lotRectifiedAmps wrote: ↑Sun Mar 05, 2023 7:07 pm
The schematic also shows the EL84 screens at 300V and the anodes at 295V - that's a bad idea for valve life and I'd recommend some screen resistors to be safe.![]()
![]()
- MikeC
- Vintage Post Junkie
- Posts: 3166
- Joined: Fri Sep 12, 2003 5:43 pm
- Location: Red Beach, Auckland
- Has liked: 1410 times
- Been liked: 965 times
Re: MikeC Sixty-One SRT
One good thing with old Vox designs is that the Screen & Anode voltages don't exceed the maximums stated in the specs of the EL84. Unlike Fender Blackface DR's which grossly exceed the voltage specs of the 6V6 (apart from the JJ 6V6S which is more like a 6L6). In my DR builds I always install 1K/3W screen grid resistors and only use JJ 6VSs. But I will put some in the SRT - what values do you recommend?
Last edited by MikeC on Sun Mar 05, 2023 9:26 pm, edited 2 times in total.
Whakanuia o mea kei a koe
- MikeC
- Vintage Post Junkie
- Posts: 3166
- Joined: Fri Sep 12, 2003 5:43 pm
- Location: Red Beach, Auckland
- Has liked: 1410 times
- Been liked: 965 times
Re: MikeC Sixty-One SRT
I've managed to improve the reverb. On the reverb recovery triode I bypassed the 33K resistor on V3 pin 8 (the cathode) with a 22uF cap. The gain went up (according to the calculator) and I could hear the improved amount of reverb. I then plugged in a 12AT7 instead of the 12AU7 and the gain improved by about 2.5 times (according to the calculator). Now the reverb pot doesn't need to be set at maximum. Progress!
Whakanuia o mea kei a koe
- codedog
- Vintage Post Junkie
- Posts: 6923
- Joined: Wed Jun 11, 2014 8:44 pm
- Location: Christchurch
- Has liked: 3602 times
- Been liked: 1101 times
- MikeC
- Vintage Post Junkie
- Posts: 3166
- Joined: Fri Sep 12, 2003 5:43 pm
- Location: Red Beach, Auckland
- Has liked: 1410 times
- Been liked: 965 times
Re: MikeC Sixty-One SRT
Patience my boy! So, I've gone back to the 12AU7 as the reverb driver/recovery tube because I managed to get some more out of the driver side with an added cathode bypass capacitor. This makes the reverb strong enough with an AU7 but I'm now trying to improve the reverb tone (it's a bit "crashy" to me). I'm also trying different speakers as the tone from Doug's SRT is so smooth - here's the YouTube clip https://www.youtube.com/watch?v=alBO_yEn5o4. They have mic'd their cab for the recording so it probably sounds different in the room. My amp is still sounding a little harsh to my ear and I am yet to change any component values from those on the schematic. And I don't have an LP with PAFs like they use - the closest I've got is a Riviera with mini hums. That's got to be part of it too. Is there anyone nearby (I'm in Red Beach) that can lend me an LP with PAFs? And I'd love to try a 25W Greenback (M magnet) as well
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Whakanuia o mea kei a koe
- MikeC
- Vintage Post Junkie
- Posts: 3166
- Joined: Fri Sep 12, 2003 5:43 pm
- Location: Red Beach, Auckland
- Has liked: 1410 times
- Been liked: 965 times
Re: MikeC Sixty-One SRT
Update:- reverb tone sorted at last, did someone just say "drip"? I ended up using a single tube design from an 1962 Ampeg ReverberRocket which has a 12DW7 at its heart. This tube is 1/2 12AU7 (driver) and 1/2 12AX7 (recovery). The reverb sounds surprisingly good to me. And there's plenty of it on tap, so much so I reduced it. Progress! Only problem is I'm spending all my time on it.
Whakanuia o mea kei a koe
- bender
- Darth Fader
- Posts: 11910
- Joined: Fri Feb 02, 2007 12:46 pm
- Location: Dorkland
- Has liked: 421 times
- Been liked: 1028 times
Re: MikeC Sixty-One SRT
Oooh! I used to have a Reverberocket clone, and it had the best sounding verb I’ve heard in an amp.MikeC wrote: ↑Thu Mar 09, 2023 9:53 pm Update:- reverb tone sorted at last, did someone just say "drip"? I ended up using a single tube design from an 1962 Ampeg ReverberRocket which has a 12DW7 at its heart. This tube is 1/2 12AU7 (driver) and 1/2 12AX7 (recovery). The reverb sounds surprisingly good to me. And there's plenty of it on tap, so much so I reduced it. Progress! Only problem is I'm spending all my time on it.
A Vox with that verb? Colour me interested!
-
- Vintage Post Junkie
- Posts: 1238
- Joined: Sun Jan 10, 2016 7:46 am
- Location: Auckland/Tokyo
- Has liked: 234 times
- Been liked: 1042 times
- MikeC
- Vintage Post Junkie
- Posts: 3166
- Joined: Fri Sep 12, 2003 5:43 pm
- Location: Red Beach, Auckland
- Has liked: 1410 times
- Been liked: 965 times
Re: MikeC Sixty-One SRT
They are much better than eyelet boards IMHO. And I can build boards with turrets - I have the kit for them.
Whakanuia o mea kei a koe