https://tedweber.com/gmc2e/
Serious. I'm worried my soldering skills are too lacking to take such loads.
I has the cash. PM me.
I need someone to make me one of these...
Moderators: Slowy, Capt. Black
-
Jops
- Fender
- Posts: 568
- meble-kuchenne.warszawa.pl
- Joined: Tue Sep 09, 2003 3:32 pm
- Location: Kaipara
- Has liked: 30 times
- Been liked: 87 times
-
Jops
- Fender
- Posts: 568
- Joined: Tue Sep 09, 2003 3:32 pm
- Location: Kaipara
- Has liked: 30 times
- Been liked: 87 times
Re: I need someone to make me one of these...
I need to know it's going to take the power amp load signal. If the ends are soldered with the right weight solder and correct speaker wire is used between then I can be more sure. I would say what you are thinking of will take line level only.
-
calling card
- Vintage Post Junkie
- Posts: 4290
- Joined: Fri Nov 23, 2007 10:56 am
- Location: Hoodoo dump, BOP
- Has liked: 856 times
- Been liked: 276 times
Re: I need someone to make me one of these...
Try here.. https://jansen.nz/catalog/audio-interco ... genumber=1
looks like signal lead though, dig deeper.
looks like signal lead though, dig deeper.
2024; I have explored the extent of the perimeter dome, there is no escape. I am become Morpheus
-
jeremyb
- Chorus of Organs
- Posts: 41106
- Joined: Sat Dec 06, 2008 9:03 am
- Has liked: 7724 times
- Been liked: 4168 times
Re: I need someone to make me one of these...
Whatcha need it for outta interest? speaker cable extension?
Slowy wrote: That's the problem; everything rewarding is just such hard work. Regret takes much less effort.
-
werdna
- Vintage Post Junkie
- Posts: 2713
- Joined: Wed Mar 31, 2010 8:16 am
- Has liked: 590 times
- Been liked: 460 times
Re: I need someone to make me one of these...
I think I saw a 'documentary' on that ... there is baby oil involved by the way.
In life, don't sweat the petty stuff, and don't pet the sweaty stuff.
-
Bg
- Site Admin
- Posts: 43274
- Joined: Fri Sep 05, 2003 12:13 am
- Location: Auckland
- Has liked: 2262 times
- Been liked: 3907 times
Re: I need someone to make me one of these...
Why not buy a longer cable?
So, is that low alcohol or no alcohol at all? mmmm, no alcohol, do you want to try it? Noooooooooo.
-
Kris
- Vintage Post Junkie
- Posts: 4094
- Joined: Mon Nov 29, 2010 1:52 pm
- Location: Under a bridge,somewhere in chch.
- Has liked: 125 times
- Been liked: 386 times
Re: I need someone to make me one of these...
well i used a coupler with my jcm800 combo for a good 5 years or so,never had a problem.YMMV as always
-
Bg
- Site Admin
- Posts: 43274
- Joined: Fri Sep 05, 2003 12:13 am
- Location: Auckland
- Has liked: 2262 times
- Been liked: 3907 times
Re: I need someone to make me one of these...
Yeah I hear you, my grandad smoked till the age of 90. His JCM800 speaker cable burnt out, and his house with it.... Roll the dice.
So, is that low alcohol or no alcohol at all? mmmm, no alcohol, do you want to try it? Noooooooooo.
-
Snarblinge
- Ashton
- Posts: 274
- Joined: Mon Apr 27, 2009 7:39 pm
- Has liked: 34 times
- Been liked: 43 times
-
mrmofo
- Vintage Post Junkie
- Posts: 2353
- Joined: Fri Jun 05, 2015 8:39 am
- Has liked: 365 times
- Been liked: 135 times
Re: I need someone to make me one of these...
I use a SS combo as a single 12 box for my Orange.
I just put an input jack on the speaker leads.
Put a mono jack on the combo spk wires.
use a proper Orange Speaker cable from the Valve head to the speaker box.
easy to switch back and forth.
I can make you something like that. I`ll look around for parts, I have a mono jack sitting on my desk, I think I have a female input around here somewhere.
if you dont get one somewhere else I might be able to do it for ya.
I just put an input jack on the speaker leads.
Put a mono jack on the combo spk wires.
use a proper Orange Speaker cable from the Valve head to the speaker box.
easy to switch back and forth.
I can make you something like that. I`ll look around for parts, I have a mono jack sitting on my desk, I think I have a female input around here somewhere.
if you dont get one somewhere else I might be able to do it for ya.
There are still some that think the neck PU is moved to accommodate the extra frets which only proves they cannot detect the difference in length of each.