Whats on your amp workbench?
Moderators: Slowy, Capt. Black
- RectifiedAmps
- Fender
- Posts: 565
- meble-kuchenne.warszawa.pl
- Joined: Tue Jul 22, 2014 7:05 am
- Location: Wellington
- Has liked: 243 times
- Been liked: 288 times
Re: Whats on your amp workbench?
I always smile when I see that ground wire coiled around the power supply lines in SF amps. I’ve always thought there’d be an interesting story behind their decision to make that a manufacturing standard for so many years. Someone in the factory must’ve thought “Stuff lead dress and proper shielded wiring - this’ll work just fine!”
- MikeC
- Vintage Post Junkie
- Posts: 3612
- Joined: Fri Sep 12, 2003 5:43 pm
- Location: Red Beach, Auckland
- Has liked: 1593 times
- Been liked: 1133 times
Re: Whats on your amp workbench?
Progress... I have tested the orig rectifier & the pair of 6L6GCs - they'll do and I've replaced 3x 22uF 500V electrolytics in the doghouse but have left the 2x 70uF items as I don't have the parts (yet). I installed the rectifier and with a light bulb limiter in play slowly bought her up & checked the DC (it's present - good so far). Then installed 3/6 pre-amp tubes, all good, then 6/6 preamp tubes, all good, then the 6L6GCs with the speaker cab plugged in. She lives & she's amplifying!
Whakanuia o mea kei a koe
"Make the most of what you have"
"Make the most of what you have"
- MikeC
- Vintage Post Junkie
- Posts: 3612
- Joined: Fri Sep 12, 2003 5:43 pm
- Location: Red Beach, Auckland
- Has liked: 1593 times
- Been liked: 1133 times
Re: Whats on your amp workbench?
Continued... now playing my Strat into the SR with the light bulb limiter removed. She sounds surprisingly good and both the reverb and trem are operational although the trem is weak & ticky. The reverb is very lush and I suspect those 4x10 alnicos help. I won't start proper checking of voltages, biasing etc until we get a 240V PT. So, old Schumacher PT now removed and it's off to Transformer Rewinds (Brian Smith) for a 240V rewind. I have retained the existing USA mains lead (it has an earth conductor) which I'll terminate with a NZ mains plug. I've removed the ground switch and the aptly named "death cap" from circuit. I've discovered that the power supply node resistor values are not the standard values but I'll tackle that when the 240V PT is installed.
- Attachments
-
- SR 115V PT.jpg (407.72 KiB) Viewed 2926 times
Last edited by MikeC on Sat Jul 13, 2024 8:44 am, edited 2 times in total.
Whakanuia o mea kei a koe
"Make the most of what you have"
"Make the most of what you have"
- MikeC
- Vintage Post Junkie
- Posts: 3612
- Joined: Fri Sep 12, 2003 5:43 pm
- Location: Red Beach, Auckland
- Has liked: 1593 times
- Been liked: 1133 times
Re: Whats on your amp workbench?
A little more info.... after more research I've confirmed that this is a 1974 Super Reverb and that there are (at least) 4 different circuit versions for the amp. Turns out this one is actually an AA270 which answers a few questions (previous posts edited accordingly). In this version Fender themselves have removed the interesting fixed/cathode biased power stage that's in other Super Reverbs. It's so much easier when you have a solid base of facts to work from.
Whakanuia o mea kei a koe
"Make the most of what you have"
"Make the most of what you have"
Re: Whats on your amp workbench?
Here’s the 1974X clone I picked up a while ago and got rebuilt.
You can probably see which parts are new and old.
It’s ready to be picked up, haven’t heard it roaring yet!
You can probably see which parts are new and old.
It’s ready to be picked up, haven’t heard it roaring yet!
- Attachments
-
- IMG_3041.jpeg (3.92 MiB) Viewed 2648 times
- Slowy
- Vintage Post Junkie
- Posts: 24309
- Joined: Wed Sep 09, 2009 4:13 pm
- Location: Orcland
- Has liked: 1158 times
- Been liked: 2780 times
Re: Whats on your amp workbench?
This Bill again? Can't wait to hear what you think.
Don't talk to me about failure; sometimes I even fail to disappoint myself.
Re: Whats on your amp workbench?
Yip, had to really twist his arm to get him to do it too!
It’s built to the Marshall Schematic as well, not the kit one it was supposedly before, so should sound pretty wicked!
Optimus has had a facelift also, I’ll post a pic when I get it back, hopefully this week…
- GrantB
- ADMIN
- Posts: 16781
- Joined: Fri Oct 31, 2003 9:04 am
- Location: Where I need to be
- Has liked: 1591 times
- Been liked: 2409 times
Re: Whats on your amp workbench?
To be fair, the normal channel sounded pretty damn monstrous prior. Looking forward to hearing your thoughts after this rebuild.
I note the new board. Looks like he kept the caps, which is good. Grounding looks way better.
"Man is the most insane species. He worships an invisible god and destroys a visible nature. Unaware that this nature he's destroying is this god he's worshipping." - Hubert Reeves
- robthemac
- Vintage Post Junkie
- Posts: 9880
- Joined: Sun Apr 28, 2019 3:47 pm
- Has liked: 1205 times
- Been liked: 1694 times
Re: Whats on your amp workbench?
If you can try the 1974 through a closed 2x12 or 4x12, it's.... somethingNZTone.e wrote: ↑Wed Jul 24, 2024 8:47 pm
Yip, had to really twist his arm to get him to do it too!
It’s built to the Marshall Schematic as well, not the kit one it was supposedly before, so should sound pretty wicked!
Optimus has had a facelift also, I’ll post a pic when I get it back, hopefully this week…
- GrantB
- ADMIN
- Posts: 16781
- Joined: Fri Oct 31, 2003 9:04 am
- Location: Where I need to be
- Has liked: 1591 times
- Been liked: 2409 times
Re: Whats on your amp workbench?
I stupidly sold my 2061CX…that with a 1974 was outrageous. But oh so loud. That’s why the cab had to gorobthemac wrote: ↑Thu Jul 25, 2024 3:33 pmIf you can try the 1974 through a closed 2x12 or 4x12, it's.... somethingNZTone.e wrote: ↑Wed Jul 24, 2024 8:47 pm
Yip, had to really twist his arm to get him to do it too!
It’s built to the Marshall Schematic as well, not the kit one it was supposedly before, so should sound pretty wicked!
Optimus has had a facelift also, I’ll post a pic when I get it back, hopefully this week…

"Man is the most insane species. He worships an invisible god and destroys a visible nature. Unaware that this nature he's destroying is this god he's worshipping." - Hubert Reeves
- Bg
- Site Admin
- Posts: 44313
- Joined: Fri Sep 05, 2003 12:13 am
- Location: Sunny Nelson
- Has liked: 2385 times
- Been liked: 4276 times
Re: Whats on your amp workbench?
I suspect I know someone who can build another.
Its not enough that we succeed, we still need others to fail
- Cdog
- Vintage Post Junkie
- Posts: 4625
- Joined: Wed Feb 07, 2007 3:01 pm
- Location: Christchurch
- Has liked: 4050 times
- Been liked: 801 times
Re: Whats on your amp workbench?
Nothing too exciting, but been wanting to change a few things in the 18W plexi for a while.
Moved the B+ regulator to a better location, (goodbye stand-by switch) and added some 'istors'... A Therm and a Var... for in-rush current limiting and over voltage protection. These amps are a hoot
Moved the B+ regulator to a better location, (goodbye stand-by switch) and added some 'istors'... A Therm and a Var... for in-rush current limiting and over voltage protection. These amps are a hoot

- robthemac
- Vintage Post Junkie
- Posts: 9880
- Joined: Sun Apr 28, 2019 3:47 pm
- Has liked: 1205 times
- Been liked: 1694 times
Re: Whats on your amp workbench?
Good to hear. My entire guitar/amp/pedal collection has recently been out of favour for 335-->cable-->18W.Cdog wrote: ↑Sun Jul 28, 2024 3:20 pm Nothing too exciting, but been wanting to change a few things in the 18W plexi for a while.
Moved the B+ regulator to a better location, (goodbye stand-by switch) and added some 'istors'... A Therm and a Var... for in-rush current limiting and over voltage protection. These amps are a hoot
IMG_20240728_145202933.jpg
- MikeC
- Vintage Post Junkie
- Posts: 3612
- Joined: Fri Sep 12, 2003 5:43 pm
- Location: Red Beach, Auckland
- Has liked: 1593 times
- Been liked: 1133 times
Re: Whats on your amp workbench?
I really like Trinity stuff. Was it a kit?
Whakanuia o mea kei a koe
"Make the most of what you have"
"Make the most of what you have"
- Cdog
- Vintage Post Junkie
- Posts: 4625
- Joined: Wed Feb 07, 2007 3:01 pm
- Location: Christchurch
- Has liked: 4050 times
- Been liked: 801 times