Community Project?
Moderators: Slowy, Capt. Black
- FuzzMonkey
- Gibson
- Posts: 618
- meble-kuchenne.warszawa.pl
- Joined: Fri Nov 06, 2020 7:25 pm
- Has liked: 514 times
- Been liked: 410 times
- NippleWrestler
- Vintage Post Junkie
- Posts: 2920
- Joined: Sat Jan 02, 2016 5:05 pm
- Has liked: 79 times
- Been liked: 1072 times
Re: Community Project?
Hello again,
I've ordered 30 of the PCBs and they should be here in a couple of weeks (DHL dependent).
I've written and uploaded a build guide here:
https://www.monarchpedals.com/build-guide
Which you can view as a PDF and download should you please. It includes tips on soldering, component choices, schematics, wiring diagrams, and a Bill of Materials with links to Tayda.
If you spot any glaring mistakes please let me know and I can hopefully fix them. Otherwise, I think that's about it and I'll reach out for addresses etc when everything is here.
For this project I've written it as you'll need 2 PCBs, one for the effect and one for the footswitch. I can supply both for $1 and ship them anywhere if you'll cover it, but they'll fit in an envelope so the price of a stamp and envelope will cover it. There are instructions in there for manual footswitch wiring which is cool too.
Just shout if you've any questions
I've ordered 30 of the PCBs and they should be here in a couple of weeks (DHL dependent).
I've written and uploaded a build guide here:
https://www.monarchpedals.com/build-guide
Which you can view as a PDF and download should you please. It includes tips on soldering, component choices, schematics, wiring diagrams, and a Bill of Materials with links to Tayda.
If you spot any glaring mistakes please let me know and I can hopefully fix them. Otherwise, I think that's about it and I'll reach out for addresses etc when everything is here.
For this project I've written it as you'll need 2 PCBs, one for the effect and one for the footswitch. I can supply both for $1 and ship them anywhere if you'll cover it, but they'll fit in an envelope so the price of a stamp and envelope will cover it. There are instructions in there for manual footswitch wiring which is cool too.
Just shout if you've any questions
- Snarblinge
- Ashton
- Posts: 274
- Joined: Mon Apr 27, 2009 7:39 pm
- Has liked: 34 times
- Been liked: 43 times
Re: Community Project?
nice work, I'm happy to refer anyone to this as a local option to start out.
b.
- NippleWrestler
- Vintage Post Junkie
- Posts: 2920
- Joined: Sat Jan 02, 2016 5:05 pm
- Has liked: 79 times
- Been liked: 1072 times
Re: Community Project?
Cool thanks man. There's 30 PCBs and if everyone here follows through that means about 15 up for grabs. I'll post it on Facebook too and see if more folks want to get involved.Snarblinge wrote: ↑Tue Jun 08, 2021 11:09 am nice work, I'm happy to refer anyone to this as a local option to start out.