Page 1 of 1

ABR-1 bridge question

Posted: Sat Feb 09, 2019 8:18 am
by Mini Forklift
Have just bought a replacement 'aged' bridge for my LP, potentially stupid question...

Do I need to match the settings of my current one in order for the intonation to be spot on, or is does every bridge need to be set individually? Cheers :thumbup:

Re: ABR-1 bridge question

Posted: Sat Feb 09, 2019 8:21 am
by codedog
I'm guessing it depends on the exact dimensions. If they're almost identical then set the saddles roughly like the old one, then adjust as necessary. My ears are not even in the same universe as "pitch perfect" so that's been fine for me. You can adjust from there if you can hear any problems with intonation.

Re: ABR-1 bridge question

Posted: Sat Feb 09, 2019 8:23 am
by Mini Forklift
codedog wrote:I'm guessing it depends on the exact dimensions. If they're almost identical then set the saddles roughly like the old one, then adjust as necessary. My ears are not even in the same universe as "pitch perfect" so that's been fine for me. You can adjust from there if you can hear any problems with intonation.
That's kind of what I had assumed I'd need to do. Intonation drives me nuts, if it's even a little off it becomes like some crazy OCD or something :crazy:

Re: ABR-1 bridge question

Posted: Sat Feb 09, 2019 12:11 pm
by Single coil
Start again with the tuner

Re: ABR-1 bridge question

Posted: Sat Feb 09, 2019 12:48 pm
by jeremyb
Just don't play past the first few frets!