Page 1 of 1

NGD - Fender Coronado

Posted: Fri Mar 17, 2023 3:53 pm
by Dano_NZ
I've slowed down a bit in terms of GAS but couldn't resist this one. Most likely 1967 given the neck dates however there is some confusion as the serial number starts with a 5 (which would put it in the 70's).

However from https://www.frettedamericana.com/produc ... oronado-ii

"According to Werner's List, the serial number range 501,282 to around 503,000 were shipped between September 1966 and January 1967."

Just put a mint NOS trem on it, which I probably paid way too much for on Reverb, but completes the look.

Sounds jazzy in the neck and twangy in the bridge.

Image

Re: NGD - Fender Coronado

Posted: Fri Mar 17, 2023 4:15 pm
by StrummersOfThunder
Congrats
I had one of those for a while.
Quite a unique, sensitive but great trem
Pickups are an aquired taste. I think they are great guitars
Good score

Re: NGD - Fender Coronado

Posted: Fri Mar 17, 2023 4:27 pm
by olegmcnoleg
Wow, that is 60s cool.

Re: NGD - Fender Coronado

Posted: Fri Mar 17, 2023 6:26 pm
by Dano_NZ
Thanks fellas, could probably do with taller frets but let’s see how we get along.

Re: NGD - Fender Coronado

Posted: Fri Mar 17, 2023 8:07 pm
by StrummersOfThunder
Dano_NZ wrote: Fri Mar 17, 2023 6:26 pm Thanks fellas, could probably do with taller frets but let’s see how we get along.
I did a refret on mine. Was one of two guitars I refretted myself,after which I vowed not to do a third.

Re: NGD - Fender Coronado

Posted: Fri Mar 17, 2023 9:32 pm
by Dano_NZ
StrummersOfThunder wrote: Fri Mar 17, 2023 8:07 pm
Dano_NZ wrote: Fri Mar 17, 2023 6:26 pm Thanks fellas, could probably do with taller frets but let’s see how we get along.
I did a refret on mine. Was one of two guitars I refretted myself,after which I vowed not to do a third.
Was the refret difficult with the bound fretboard? I understand that Fender installed frets sideways in the old fenders.

Re: NGD - Fender Coronado

Posted: Sat Mar 18, 2023 3:03 am
by StrummersOfThunder
Dano_NZ wrote: Fri Mar 17, 2023 9:32 pm
StrummersOfThunder wrote: Fri Mar 17, 2023 8:07 pm
Dano_NZ wrote: Fri Mar 17, 2023 6:26 pm Thanks fellas, could probably do with taller frets but let’s see how we get along.
I did a refret on mine. Was one of two guitars I refretted myself,after which I vowed not to do a third.
Was the refret difficult with the bound fretboard? I understand that Fender installed frets sideways in the old fenders.
I didn't remove the binding. I just nibbled the tang
Yes I find everything to do with frets difficult
I actually got an ok result tho.

Re: NGD - Fender Coronado

Posted: Sat Mar 18, 2023 5:15 am
by GrantB
I think I did a refret on Ben’s one. Pretty straightforward.

Re: NGD - Fender Coronado

Posted: Sat Mar 18, 2023 8:14 am
by bender
Awesome! I love the trem on these. I really enjoyed mine, but ultimately found the neck too slim for my ham fisted playing.

Re: NGD - Fender Coronado

Posted: Sat Mar 18, 2023 4:30 pm
by sizzlingbadger
I had one too, but I must admit I didn't like it much.

IMG_0919.jpeg
IMG_0919.jpeg (69.67 KiB) Viewed 2481 times

Re: NGD - Fender Coronado

Posted: Sun Mar 19, 2023 11:09 am
by Dano_NZ
sizzlingbadger wrote: Sat Mar 18, 2023 4:30 pm I had one too, but I must admit I didn't like it much.


IMG_0919.jpeg
Looks exactly like mine!

Re: NGD - Fender Coronado

Posted: Sun Mar 19, 2023 11:43 am
by bender
if o had mine again, I’d get Glynn to rewind the bridge pickup- it was the weak point to me.