Dodgy rythym and thick strings here...

Moderators: Slowy, Capt. Black

BY foal30
#835827
Wrong photo.
Bugger

But yes this uploading photos works here
BY foal30
#836100
Anyone tried the Diamond Octaver on Bass Guitar?
I do like Diamond pedals.
User avatar
BY Bg
#838344
Shit I've been doing it wrong. Forget overdrive for dirtying up a p-bass. Treble booster is where its at. Rangemaster (Deranged master) on the helix is the tone I've been searching for that grungy classic rock vibe with great attack.
BY foal30
#838372
Bg wrote:Shit I've been doing it wrong. Forget overdrive for dirtying up a p-bass. Treble booster is where its at. Rangemaster (Deranged master) on the helix is the tone I've been searching for that grungy classic rock vibe with great attack.


I got the Free The Tone Bass Blaster Overdrive and there's no looking back
The only reason I can think of about their lack of Hype is maybe MIJ equals too pricey
BY foal30
#838409
It's got a Hofner esq control plate
Maybe a Japenese type Burns/Baldwin

Recorded track could be Synth Bass FWIW
BY foal30
#842720
I'm going to pull the board apart tonight. It remains temperamental almost certainly down to some sort of power disparity. It'll most likely be the Diamond Bass Comp which would be a pain as its an amazing piece of kit.

What's the "best" way to split the signal? That old Boss pedal that was like a Junction Box? A Y cable??

I want some pedals into the Effects Loop (specifically Flanger and Chorus) and some through the front (specifically O/D, Filter, Comp)

Will recable 1 by 1 again as well. Slightly frustrating but when it works correctly it's worth the time and effort.

Cheers team.
User avatar
BY Mattallica
#842721
foal30 wrote:I'm going to pull the board apart tonight. It remains temperamental almost certainly down to some sort of power disparity. It'll most likely be the Diamond Bass Comp which would be a pain as its an amazing piece of kit.

What's the "best" way to split the signal? That old Boss pedal that was like a Junction Box? A Y cable??

I want some pedals into the Effects Loop (specifically Flanger and Chorus) and some through the front (specifically O/D, Filter, Comp)

Will recable 1 by 1 again as well. Slightly frustrating but when it works correctly it's worth the time and effort.

Cheers team.


Hey Ruben, I know you've done this somewhere before, but can you list the pedals and amp you're dealing with. A loop switcher might seem a little high tech but it could be key to solving your issues
BY foal30
#842731
Cheers bro
Off to work now
Will check in later
User avatar
BY Terexgeek
#842777
I can drop my loop switcher past next Sunday if you like, that and some cables.
BY foal30
#842797
Terexgeek wrote:I can drop my loop switcher past next Sunday if you like, that and some cables.


Cheers bro. Heaps of Cables here.

Laid the board out again and everything was no problem lol.

Matt

Bass - FTT OD - 3Leaf Filter - Wounded Paw Fuzz - Boss PBEQ3-Boss Flanger - Diamond Bass Comp - Korg PB - Tech 21 Chorus - Sadowsky Pre

Tomorrow if it rains I'll switch around and +/- Dunlop Bass Wah Wounded Paw Ram

The Diamond runs on a different plug and needs 18v
The Sadowsky may 'pop' when switching on but I think that's "true bypass"??
BY foal30
#847411
Quite like the Wounded Paw Attack Goat Fuzz with the old Brown Boss Bass Flanger
Pick and Jazz Bass
User avatar
BY Kev77
#847413
Anything with a blend option is useful.
BY foal30
#847756
Does anyone know if any of these pedals are "Buffered"

Apparently putting "Buffered" Pedal at the end of the chain is the only way to go

Boss BF-2, Boss PEQ3B, Korg PB, Wounded Paw Attack Goat and Battering Ram

Cheers lads
BY foal30
#847757
I'm assuming "Buffered" is the opposite of "True Bypass"
User avatar
BY jeremyb
#847762
Buffers aren't bad if used correctly, the boss pedals are all buffered, korg isn't, don't know about the others :)
  • 1
  • 11
  • 12
  • 13
  • 14
  • 15