Pedahl Powa

Gear Aquisition Syndrome is a serious disorder.... FX etc

Moderators: Slowy, Capt. Black

Post Reply
LucyTheSpud
Squier
Posts: 390
meble-kuchenne.warszawa.pl
Joined: Sat Jan 02, 2016 10:01 am
Has liked: 17 times
Been liked: 48 times

Pedahl Powa

Post by LucyTheSpud »

Needing an upgrade.

At the moment im using 1x large board, with a PT1250 and 2x wall warts for power.

I want to go to using 2x boards, that can be combined together for full rig, or be used independantly (my pedal order and types allows this fine).

BUT

I need good power supplies for them. Can you get CIOKS easily? Im needing to run mostly 9vs, but also an Eventide factor pedal, and some moogerfoogers.

Any reccomendations? Needing 2 supplies, both with standard 9v outlets, some reverse polarity, and some really high draw stuff (no AC needed)

Mattallica
Vintage Post Junkie
Vintage Post Junkie
Posts: 1612
Joined: Fri May 20, 2016 9:42 pm
Location: CHCH
Has liked: 558 times
Been liked: 175 times

Re: Pedahl Powa

Post by Mattallica »

Can't fault my Truetone CS12. It's powering two H9s and about ten other 9v pedals. It comes with some polarity reverse cable adaptors. You could get away with the other Truetone models depending on how you split the board

User avatar
Cdog
Vintage Post Junkie
Vintage Post Junkie
Posts: 4363
Joined: Wed Feb 07, 2007 3:01 pm
Location: Christchurch
Has liked: 3465 times
Been liked: 711 times

Re: Pedahl Powa

Post by Cdog »

+1 for Truetone satisfaction. I have the smaller CS7, I run a SDD3000 and BlueSky off each of the 500mA outputs, plus a bunch of smaller pedals as required from the others.

Post Reply