5-pin DIN socket to 2xTRS 1/4" jacks adapter cable

Pedal manufacturers in here...

Moderators: Slowy, Capt. Black

Post Reply
Mattallica
Vintage Post Junkie
Vintage Post Junkie
Posts: 1612
meble-kuchenne.warszawa.pl
Joined: Fri May 20, 2016 9:42 pm
Location: CHCH
Has liked: 558 times
Been liked: 175 times

5-pin DIN socket to 2xTRS 1/4" jacks adapter cable

Post by Mattallica »

Chaps,

I want to make an adapter cable for the control outs on my ES-5 to the footswitch input on my IRT-Studio. I have all the bits i'll need to make it.

My question is how to earth the cable properly?

The din socket has the sleeve AND the common/ground pin. Do i just connect the pin to the sleeve?

User avatar
sizzlingbadger
Vintage Post Junkie
Vintage Post Junkie
Posts: 8241
Joined: Sat Jan 15, 2011 7:12 am
Location: Wire Wrapper
Has liked: 1202 times
Been liked: 1398 times

Re: 5-pin DIN socket to 2xTRS 1/4" jacks adapter cable

Post by sizzlingbadger »

can do, won't matter much for a control cable.
Tube amp and guitar tones straight from 1958… amazing how believable the sounds were back then, even without the modellers...

Mattallica
Vintage Post Junkie
Vintage Post Junkie
Posts: 1612
Joined: Fri May 20, 2016 9:42 pm
Location: CHCH
Has liked: 558 times
Been liked: 175 times

Re: 5-pin DIN socket to 2xTRS 1/4" jacks adapter cable

Post by Mattallica »

Cheers Badg'. Yeah thinking about it now, it's not in the signal path of the amp so it shouldn't effect anything important

Post Reply