Work in Progress
Moderators: Slowy, Capt. Black
- ash
- Vintage Post Junkie
- Posts: 7505
- meble-kuchenne.warszawa.pl
- Joined: Mon May 10, 2004 4:01 pm
- Location: Auckland, NZ
- Has liked: 3 times
- Been liked: 5 times
But wait, there's more!
Here are some pics of the tele with after the first few coats of lacquer...
http://ashcustomworks.com for custom built electric guitars hand made in new zealand
- ash
- Vintage Post Junkie
- Posts: 7505
- Joined: Mon May 10, 2004 4:01 pm
- Location: Auckland, NZ
- Has liked: 3 times
- Been liked: 5 times
The tele body is getting a new coat of lacquer on the top because the old lacquer was a bit rough.
The other body is an Ash Aurum. Basically a cross between a '54 LP and a PRS. Will be a gold top with cream P90s and a stoptail bridge.
The other body is an Ash Aurum. Basically a cross between a '54 LP and a PRS. Will be a gold top with cream P90s and a stoptail bridge.
http://ashcustomworks.com for custom built electric guitars hand made in new zealand
mmmm... luverly
My twitting tweets of twitterness
@ash lol/RT "@ChelseaVPeretti Had fun in the Cinema Tent tonight w @adultswim @robcorddry #bonnaroo #fonz #hottubtimemachineintonationjokes #childrenshospital #mud #pee" //by @Jenesis
Here be bloggins
@ash lol/RT "@ChelseaVPeretti Had fun in the Cinema Tent tonight w @adultswim @robcorddry #bonnaroo #fonz #hottubtimemachineintonationjokes #childrenshospital #mud #pee" //by @Jenesis
Here be bloggins
- ash
- Vintage Post Junkie
- Posts: 7505
- Joined: Mon May 10, 2004 4:01 pm
- Location: Auckland, NZ
- Has liked: 3 times
- Been liked: 5 times
Yep, the binding is a 1mm strip of plastic (or celluloid in this case) which is glued into a rebate around the edge and then scraped flush.
http://ashcustomworks.com for custom built electric guitars hand made in new zealand
- ash
- Vintage Post Junkie
- Posts: 7505
- Joined: Mon May 10, 2004 4:01 pm
- Location: Auckland, NZ
- Has liked: 3 times
- Been liked: 5 times
Here is the Aurum with its neck in place for the first time. Looks a bit odd being all square with the flat fretboard surface. I think this will be better than I expected for a prototype.
http://ashcustomworks.com for custom built electric guitars hand made in new zealand