Show us your pedalboard
Moderators: Slowy, Capt. Black
-
- Tokai
- Posts: 469
- meble-kuchenne.warszawa.pl
- Joined: Tue Jun 29, 2004 1:40 pm
-
- Vintage Post Junkie
- Posts: 4028
- Joined: Tue Nov 08, 2005 8:50 am
- Location: Wellington
-
- Fender
- Posts: 568
- Joined: Tue Sep 09, 2003 3:32 pm
- Location: Kaipara
- Has liked: 30 times
- Been liked: 87 times
Excuse the messy cables... Is there a supplier for George L's in NZ?
Just a cheapo aluminium case from the warehouse with the brackets cut and the pins knocked out, closes up easy enough. I'm keen for an angled board too and some where to hide the cables.
Got the P & C from Mukuzi which was a super smooth transaction (Cheers Mukuzi). Not sure how to use it yet. Best results was running it as a boost. So not sure if it will stay.
The wah is an HBE Medicine bawl and the pedals at the top don't get used.
Just a cheapo aluminium case from the warehouse with the brackets cut and the pins knocked out, closes up easy enough. I'm keen for an angled board too and some where to hide the cables.
Got the P & C from Mukuzi which was a super smooth transaction (Cheers Mukuzi). Not sure how to use it yet. Best results was running it as a boost. So not sure if it will stay.
The wah is an HBE Medicine bawl and the pedals at the top don't get used.
- malevolentsparkle
- Ashton
- Posts: 295
- Joined: Sun Jul 10, 2005 11:58 am
- Location: Timaru
if your not using the parametric EQ, boss dont make them anymore and i hear they're in damand. you might get a pretty penny for it.
'71 Epiphone EA-250 (JP) or 84' Ibanez Roadstar II -> MXR Super Comp Compressor -> Ernie Ball VPjr -> Bluesberry Hotcake -> Visual Sound H2O V3 Chorus/Delay -> MXR Carbon Copy Analog Delay -> '68 Jansen Bassman 50 -> Carvin 2x12 Celestion Seventy80 Cab
I'm currently building an analogue pedal-board after being down the multi-fx route. So far I've got the following-
(all photos are samples only, except FT-2 w/ EV-5)
MIJ 1983 Boss TU-12 Chromatic Tuner (digital)
1986 Boss FT-2 analogue Dynamic Filter
--- 1992 Roland EV-5 analogue expression
2006 Daphon E20CM analogue Compressor
2004 Nobels ODR-1 Natural Overdrive
2005 Danelectro D-2 Fab Overdrive
1990's Ibanez TS5/808 Tubescreamer (socketed RC4558P chip, tone mods)
2006 Danelectro D-1 Fab Distortion
2006 Daphon E20DS analogue Distortion
2006 Daphon E20GE 7-band analogue Equalizer
2006 Daphon E20PH analogue Phaser
2006 Danelectro D-6 Fab Flange
MIT ???? Arion SFL-1 Stereo analogue Flanger
2006 Danelectro D-4 Fab Chorus
MIJ 1980's Aria ACH-1 stereo analogue Chorus
MIT by Maxon 1988 Ibanez SC10 Super Stereo analogue Chorus
MIT by Maxon 1989 Ibanez SC10 Super Stereo analogue Chorus
MIJ 1980's Arion SAD-1 Stereo analogue Delay
2006 Danelectro D-5 Fab Echo
199? Boss EH-2 analogue Enhancer
I also have a Johnson J-Station, Behringer V-Tone Guitar GDI21, Behringer V-Tone Acoustic ADI21, Behringer V-Tone Bass BDI21, MIJ Boss CE-2B analogue Bass Chorus, Vox Brian May treble booster amp, and a bunch of amps.
And, a couple of Visual Sound 1 Spot 9V adapters, etc, are on hand to power the pedals.
(all photos are samples only, except FT-2 w/ EV-5)
MIJ 1983 Boss TU-12 Chromatic Tuner (digital)
1986 Boss FT-2 analogue Dynamic Filter
--- 1992 Roland EV-5 analogue expression
2006 Daphon E20CM analogue Compressor
2004 Nobels ODR-1 Natural Overdrive
2005 Danelectro D-2 Fab Overdrive
1990's Ibanez TS5/808 Tubescreamer (socketed RC4558P chip, tone mods)
2006 Danelectro D-1 Fab Distortion
2006 Daphon E20DS analogue Distortion
2006 Daphon E20GE 7-band analogue Equalizer
2006 Daphon E20PH analogue Phaser
2006 Danelectro D-6 Fab Flange
MIT ???? Arion SFL-1 Stereo analogue Flanger
2006 Danelectro D-4 Fab Chorus
MIJ 1980's Aria ACH-1 stereo analogue Chorus
MIT by Maxon 1988 Ibanez SC10 Super Stereo analogue Chorus
MIT by Maxon 1989 Ibanez SC10 Super Stereo analogue Chorus
MIJ 1980's Arion SAD-1 Stereo analogue Delay
2006 Danelectro D-5 Fab Echo
199? Boss EH-2 analogue Enhancer
I also have a Johnson J-Station, Behringer V-Tone Guitar GDI21, Behringer V-Tone Acoustic ADI21, Behringer V-Tone Bass BDI21, MIJ Boss CE-2B analogue Bass Chorus, Vox Brian May treble booster amp, and a bunch of amps.
And, a couple of Visual Sound 1 Spot 9V adapters, etc, are on hand to power the pedals.
Last edited by 1964 on Tue Jul 25, 2006 3:38 pm, edited 3 times in total.
-
- Vintage Post Junkie
- Posts: 4028
- Joined: Tue Nov 08, 2005 8:50 am
- Location: Wellington
- malevolentsparkle
- Ashton
- Posts: 295
- Joined: Sun Jul 10, 2005 11:58 am
- Location: Timaru
two stero chorus' eh? how do you have them set up?
'71 Epiphone EA-250 (JP) or 84' Ibanez Roadstar II -> MXR Super Comp Compressor -> Ernie Ball VPjr -> Bluesberry Hotcake -> Visual Sound H2O V3 Chorus/Delay -> MXR Carbon Copy Analog Delay -> '68 Jansen Bassman 50 -> Carvin 2x12 Celestion Seventy80 Cab
> “have you rehoused the Fab?â€
No. And as part of my studio rig, I expect them to be fine. The plastic is definitely more brittle than the 80's plastic pedals (like the Aria) though, and would probably suffer under heavy abuse. Seems pretty reasonable though.
I'll probably end up with a Boss ME-50 for live use.
No. And as part of my studio rig, I expect them to be fine. The plastic is definitely more brittle than the 80's plastic pedals (like the Aria) though, and would probably suffer under heavy abuse. Seems pretty reasonable though.
I'll probably end up with a Boss ME-50 for live use.
Last edited by 1964 on Wed May 24, 2006 9:49 am, edited 2 times in total.
-
- Vintage Post Junkie
- Posts: 4028
- Joined: Tue Nov 08, 2005 8:50 am
- Location: Wellington
- The Scarecrow
- Dial Them Mids IN!
- Posts: 3884
- Joined: Tue Sep 09, 2003 3:40 pm
- Has liked: 208 times
- Been liked: 253 times
Well, my pedalboard is rather sparse at the moment, simply because I've taken the "basic" approach over the last year or so. That at it's terribly easy to setup up.
Pretty much just a piece of plywood, and some folded carboard all wrapped in insulation tape and raised on a slightly angle in an old laptop bag I got from Cashies for $10. Has room enough right now to accomodate a 4 point power plug and 2m extenstion cable, plus all my leads etc, all in one bag.
Just bought an EQ and a delay is to follow, so I'll be jamming them all in there, somehow. Not the prettiest, but it cost me about $16 all up to build, so no complaints.
Pretty much just a piece of plywood, and some folded carboard all wrapped in insulation tape and raised on a slightly angle in an old laptop bag I got from Cashies for $10. Has room enough right now to accomodate a 4 point power plug and 2m extenstion cable, plus all my leads etc, all in one bag.
Just bought an EQ and a delay is to follow, so I'll be jamming them all in there, somehow. Not the prettiest, but it cost me about $16 all up to build, so no complaints.
- Attachments
-
- pedalboard.JPG (67.81 KiB) Viewed 19046 times
http://www.facebook.com/#!/pages/The-Al ... 895?ref=ts
Trade Me: The_Scarecrow
"Friends don't let friends scoop mids."
Trade Me: The_Scarecrow
"Friends don't let friends scoop mids."
Some sweet pedalboards on here... I'm about to start putting my pedalboard back together again; I've been planning it out today, and it is looking nothing short of epic (both in price, and ambition).
I'm on the hunt for a whole bunch of pedals, see my post in the classifieds if you can hook me up with any of the following brands...
Voodoo Labs (Looking at the Chorus, Sparkledrive, and Tremolo)
G2D (Want the Classic)
Boss (Only need a DD5/tap and a TU2 tuner, no other rubbish!)
Robert Keeley (Wanting the Compressor, the Clean Boost, and a Keeley modded Wah)
And that's pretty much the list. I have an ATA Road/Flightcase being retrofitted as a board now, with a Pedalpower 2 and George L's wired into it - should be my best work yet!
I'm on the hunt for a whole bunch of pedals, see my post in the classifieds if you can hook me up with any of the following brands...
Voodoo Labs (Looking at the Chorus, Sparkledrive, and Tremolo)
G2D (Want the Classic)
Boss (Only need a DD5/tap and a TU2 tuner, no other rubbish!)
Robert Keeley (Wanting the Compressor, the Clean Boost, and a Keeley modded Wah)
And that's pretty much the list. I have an ATA Road/Flightcase being retrofitted as a board now, with a Pedalpower 2 and George L's wired into it - should be my best work yet!